BXSHW - GC-40 PART B

  • MSDS: BXSHW
  • Manufacturer: WESTPAC PRODUCTS CO INC
  • Product Name: GC-40 PART B
  • National Stock Number: 9999-00N000004
Product Identification

Product ID:GC-40 PART B
MSDS Date:06/11/1987
FSC:9999
NIIN:00N000004
Kit Part:Y
MSDS Number: BXSHW

Responsible Party
WESTPAC PRODUCTS CO INC
106 HEGENBERGER LOOP
OAKLAND, CA 94621
US

Emergency Phone: 415-632-3778

Info Phone: 415-632-3778

Cage: 4Z694

Contractor
WESTPAC PRODUCTS CO INC
OAKLAND, CA 94621-1326 US

Cage: 4Z694

Ingredients

CATALYST; (MODIFIED ALIPHATIC POLYAMINES)

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:LD50:(ORAL,RAT) 1,660 G/KG
Routes of Entry: Inhalation:NO Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:PROLONGED OR REPEATED CONTACT
MAY CAUSE SKIN IRRITATION, DERMATITIS OR EYE IRRITATION. MAY CAUSE
SKIN SENSITIZATION.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:CAUTION:THIS MATERIAL CONTAINS AN AMINE. INGEST:CALL MD
IMMEDIATELY . INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE
O*2/ARTF RESP) . SKIN:WASH WITH SOAP & WATER. WASH CLOTHES BEFORE R
EUSE. EYES:FLUSH WITH WATER FOR @ LEAST15 MINUTES AND SEEK MEDICAL
ATTENTION.

Fire Fighting

Flash Point Method:CC
Flash Point:255F,124C
Extinguishing Media:DRY CHEMICAL, CO*2, FOAM, WATER SPRAY.
Fire Fighting Procedures:NONE REQUIRED. USE NIOSH/MSHA APPROVED SCBA &
FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE.

Accidental Release

Spill Release Procedures:ABSORB WITH INERT MATERIAL. PUT IN DISPOSAL
CONTAINER. FLUSH AREA WITH WATER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID SKIN AND EYE CONTACT & BREATHING
OF VAPORS. LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
Other Precautions:ENSURE THAT ALL CONTAINERS ARE PROPERLY LABELED TO
PREVENT ACCIDENTAL INGESTION.

Exposure Controls

Respiratory Protection:IN CONFINED AREAS, USE NIOSH/MSHA APPROVED
RESPIRATOR.
Ventilation:LOCAL EXHAUST PREFERABLE, MECHANICAL IS ACCEPTABLE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ADEQUATE SKIN PROTECTION. ANSI APPRVD
EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Spec Gravity:0.97 (H*2O=1)
Evaporation Rate & Reference:<1
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR TO SLIGHTLY CLOUDY LIQUID, AMINE ODOR.
Percent Volatiles by Volume:NIL

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS AND EPOXY RESINS, STRONG OXIDIZERS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:AMMONIA, CO, CO*2 WHEN BURNED.
Conditions to Avoid Polymerization:STRONG ACIDS AND EPOXY RESINS IN
UNCONTROLLED AMOUNTS.

Disposal

Waste Disposal Methods:INCINERATE OR BURY IN LANDFILL IN ACCORDANCE
WITH APPROVED FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.